Accu Systems HPJ-V-48 Horizontal/Vertical CNC Bore & Dowel
Constructed of 1/4" tubular steel.
Table top 1" thick machined aluminum -
Carriage consists of Horizontal and Vertical machining capability:
Horizontal consists of:
(1) 1/2 machined aluminum horizontal spindle plate
(1) 3 HP High Frequency Direct Drive 24,000 RPM Horizontal Routing Spindle
(1) Glue Inserter
(1) Dowel Inserter
(1) X Axis Servo Control for positioning Vertical consists of:
(1) 1/2 machined aluminum vertical spindle plate
(1) 3 HP High Frequency Direct Drive 24,000 RPM Vertical Routing Spindle
Note: Vertical Spindle positioning in Y axis by means of mechanical/digital counter.
CNC Positioning in Y axis controlled by program. The Y axis will only control the horizontal drill depth of up to 1 3/4" deep.
The clamps are designed to rigidly hold the parts to the machining surface.
To increase the thickness capacity from 1" up to 1 3/4" thick.
The adjustable back fence is designed to allow for adjustment to accommodate thin work pieces down to 1/2" material thicknesses and
still insert a 6 mm dowel.
18" Vibratory dowel bowl mounted above machine.
Patented dowel insertion system is a straight forward design. Dowel depth is set via a mechanical digital readout located on back of machine and is easily adjustable for different length dowels.
The "Direct Reject System" automatically detects an improperly sized dowel and notifies the operator via the operator interface for dowel removal. The dowel reject slide is opened, the dowel is removed, and then normal operation is resumed.
Note: Standard dowel diameter supplied with machine is 8 mm. Other diameters available upon request.
The Glue Inserter is designed to accurately dispense glue into the hole in a predefined metered amount.
The glue nozzle is made of a self-sealing nonstick Delrin material to allow for either glue or water to be used in the machine.
It consists of an enclosed system using needle and seat at valve, high pressure diaphragm pump to 100 psi, with infinite adjustment to all valves
A 15" High Resolution Industrial Touch screen PC is used for the operator interface to store, recall, and run programs.
The Computer is equipped with an Ethernet connection to allow for remote diagnostics and troubleshooting to be performed via the Internet.
A Networking Card is included along with the ability to access a program library.
Pentium 4 - 2GH - 256 megabyte ram - 4 gig flash drive -
Touch screen: - 15" color - 1024 X 768 resolution - Rated 35 million touches
Software: Windows XP Pro
OPERATOR INTERFACE SCREEN
6 HP SPINDLE UPGRADE
INCREASED Y AXIS TRAVEL