Power: Volts: 220 Amps: 55 Phase: Three Air Required: Less than 1 CFM at 90 P.S.I.
Specifications: This machine is to cut both of the ends off and cuts them square. The door is clamped into position and manually pushed through four 5 hp motors 3450 RPM. The four saw blades rotation is reversed so they make a skim cut and there is no tear out. When the ends are cut the operator can pull the door back through the blades and remove the door from the same side he loaded it.
Production Rate: Operator Controlled.
Other Features: This machine can do doors from 6'8" to 10'0".
This Machine will come with a video showing how to use and operate this Machine.